The floor paving "double standard" is officially implemented. The national standard "Wooden Floor Paving Acceptance and Use Specification" GB/T20238-2006 and the Ministry of Construction "Wooden Floor Paving Engineering Technical Regulations" (CECS191: 2005) were launched at the same time, which will make the paving There are rules to follow for the quality of the equipment. For the new wooden floor paving standards, 9 simple methods are provided for consumers to check whether the wooden floor paving is qualified.
1. The accessory system used must be a qualified product.
2. The thickness of the floor mat must be greater than 2mm, with a slight wave shape as a whole.
3. The maximum gap between the skirting product and the floor product should be less than 3mm.
4. According to the requirements of the paving standard, the height difference of the product cannot be greater than 0.2mm.
5. Insert the back of the wallpaper blade into the horizontal and vertical joints of the floor. If it can be inserted, the gap may be too large.
6. The sawed door cover shall not be more than 1.0mm higher than the upper surface of the floor.
7. Standing at the buckle, quickly tap the surface of the buckle with the sole of one foot to check whether the buckle is firm.
8. The consumption standard of the floor stipulates that the loss rate should usually not exceed 5%.
9. 8-12mm expansion gaps should be reserved at the junction of the floor, pipes and walls.
